|
|
|
Beltronics direct CORD with fuse round plug
New with Detailed
instructions, wire tie to make your installation neat.
Email us if you
need help installing these high quality cords
We provide a 1 year warranty with all of our direct cords!
Free up your Cigarette Lighter outlet!
Install a
Direct Hard Wire Power Cord with FUSE TODAY
Tired of dangling
power cords? Our direct cords eliminate the bulky dangling power cords that
hang over your dashboard and over your rearview mirror.
Our instructions are
very detailed and installation is very simple.
We usually ship the same day so
you get your order with lightning fast shipping!
|
What is a Direct
Wire Cord with FUSE?
|
The Direct Wire Cord is an optional
accessory that allows you to connect the Radar Detector directly to your fuse
block or other 12-volt source
(leaving your lighter socket free for other uses).
The Direct Wire Cord is approximately 8
feet long and comes
with a built-in FUSE to protect your unit.
Normally comes
with a T - Tap
to connect to a power wire source like below.
If you need a Fuse tap, just let us know which one you
would like and we'll replace the T-Tap in your order.
1. Blade Fuse
Tap
to connect to a blade fuse
in the fuse box, or a
2. Mini Blade Fuse
Tap
to connect to a mini blade
fuse in the fuse box.
Now you can
wire directly to your fuse box or power wire source and eliminate dangling power
cords.
Our power cords will allow your
radar detector to be hard wired to your vehicle very easily. If you do
change vehicles, simply unplug the red wire from the T-tap connector or Fuse
Tap, and unhook the black ground wire.
This kit will work on the below detectors that uses the "Round" type power plug.
Beltronics models:
VECTOR: 985, 960, 945, 940
OLD EXPRESS
SERIES: Cordless, 935, 930, 925, 920, 910
EARLIER MODELS:
990 Intl, 990, 980, 970, 950, 936, 926, 916, 906, 890, 880, 870,
860, 855STi, 850STi, 846i, 845STi, 840i, S95
New Direct Cord
with
FUSE kit
Round Plug
Detailed instructions to make your installation a breeze
Wire tie to make your installation neat
Normally comes
with a T - Tap
to connect to a power wire source.
If you need a Fuse tap, just let us know which one you
would like and we'll replace the T-Tap in your order.
1. Blade Fuse
Tap
or a
2. Mini Blade
Fuse Tap
to connect to fuse in the fuse box very easily.
Make sure you get a 1 year limited
warranty at no charge.
Delivery Confirmation to track your
order. (available in most cases)
|
You might also be
interested in:
|
New Direct Cord w/ FUSE
New Hidden Mirror Direct Cord
New Stealth Mirror Direct Cord
New Cigarette Lighter Coiled Cord
Plug
New Cigarette Lighter Straight Cord
Plug
Need to customize a cord?
|
