Valentine Direct-Wire Adapter Splitter - "Be Safe with Safe-N-Sound1.com"

Valentine Direct - Wire Adapter Splitter

Free up your Cigarette Lighter outlet! Install a Direct - Wire Adapter Splitter TODAY

Missing a hard wire adapter? Get one here!

What is a Direct - Wire Adapter Splitter Kit?

The Direct - Wire Adapter Splitter is an optional accessory that allows you to connect the Valentine V 1.7 or V 1.8 Radar Detector directly to your fuse block or other 12-volt source (leaving your lighter socket free for other uses) and provides two (2) accessory outlets. You could use the outlets to plug up accessories like our round or flat mute button cords or even the Valentine conceal display unit.

This is a simple installation with easy to follow DETAILED instructions.

The Direct - Wire Adapter Splitter is approximately 3 inches X 2 inches X 1 inch. It has one outlet to hook up the cord to your Radar Detector and TWO (2) Acc outlets so you can hook up other Valentine accessories.

Did We mention it comes with a built-in LOW AMP FUSE to protect your equipment?

Be Safe with Safe-N-Sound1 products that come with a fast blowing, low amp fuse, guaranteed to protect your equipment.

Now you can wire directly to your fuse box and eliminate dangling power cords.

Normally comes with a T - Tap to connect to a power wire source like below.

If you need a Fuse tap, just let us know which one you would like and we'll replace the T-Tap in your order.

1. Blade Fuse Tap to connect to a blade fuse Direct Cord Tap in the fuse box, or a

2. Mini Blade Fuse Tap to connect to a mini blade Direct Cord Tap fuse in the fuse box.

Now you can wire directly to your fuse box or power wire source and eliminate dangling power cords.

Direct Cord Tap Direct Cord Fuse Tap

Our power cords will allow your radar detector to be hard wired to your vehicle very easily. If you do change vehicles, simply unplug the red wire from the T-tap connector or Fuse Tap, and unhook the black ground wire.

This kit will work on the below detectors that uses the "Modular" type power plug.

Valentine models:
All Valentine Radar Detector models

What's included?

New Valentine Direct - Wire Adapter Splitter Kit with a built-in LOW AMP FUSE

Detailed instructions to make your installation a breeze

Wire ties to make your installation neat

Normally comes with a T - Tap to connect to a power wire source.

If you need a Fuse tap, just let us know which one you would like and we'll replace the T-Tap in your order.

1. Blade Fuse Tap or a

2. Mini Blade Fuse Tap to connect to fuse in the fuse box very easily.

Make sure you get a 1 year limited warranty at no charge.

Delivery Confirmation to track your order. (available in most cases)